Launch offer — 10% off your first order with code WELCOME10 · Free UK tracked delivery over £40BLACK FRIDAY EARLY ACCESS · 25% off everything, applied automatically · Ends Cyber Monday · Free UK tracked delivery over £40

HPLC Purity Testing for Research Peptides: What ≥98% Really Means

Purity is the single most important number on a research peptide’s Certificate of Analysis, and High-Performance Liquid Chromatography (HPLC) is the method used to measure it. At Claripep we require a minimum of ≥98% HPLC purity across our catalogue, independently verified before any batch is listed. This guide explains what that figure actually represents, how the analysis works, and — just as importantly — what an HPLC result does not tell you.

What HPLC measures

HPLC separates the components of a sample by pushing it, dissolved in a liquid solvent, through a column packed with a finely divided stationary material under high pressure. For peptides, the standard approach is reverse-phase HPLC (RP-HPLC), which separates molecules according to how strongly they interact with a hydrophobic column surface. The target peptide and any structurally similar impurities travel through the column at slightly different speeds and emerge — or “elute” — at different times.

As each component leaves the column it passes a UV detector, typically set to around 214–220 nm, the wavelength at which the peptide bond absorbs light. The detector records a chromatogram: a trace of absorbance against time, in which each population of molecules appears as a peak.

How a purity percentage is calculated

Purity is reported as the area of the main peak as a percentage of the total area of all peaks in the chromatogram. If the target peptide accounts for 98.5% of the combined peak area, the sample is reported as 98.5% pure by HPLC. The remaining 1.5% represents other UV-absorbing species — most commonly closely related peptide impurities such as truncated or deletion sequences left over from synthesis.

This is why a tall, clean, symmetrical main peak with only small satellite peaks is the signature of a high-purity batch, and why a chromatogram with several sizeable secondary peaks indicates a less pure preparation, regardless of the headline number.

What ≥98% does — and does not — tell you

A ≥98% HPLC result is a strong quality signal, but it has well-defined limits that every researcher should understand:

  • It is a relative measure, not an absolute one. HPLC purity describes the proportion of UV-absorbing material that is the target peptide. It does not, on its own, tell you the net peptide content of the vial — the actual mass of peptide versus water, residual salts, and counter-ions such as trifluoroacetate or acetate, which absorb little or no UV at the detection wavelength and so may not appear on the chromatogram.
  • It does not confirm identity. HPLC tells you how much of the sample is a single dominant species; it does not prove that species is the peptide you ordered. Confirming identity requires mass spectrometry, which measures molecular weight. Purity and identity are two separate questions, and a complete COA answers both.
  • It is method-dependent. The same sample can return slightly different purity figures depending on the column, solvent gradient, run time, and detection wavelength used. This is one reason independent, third-party testing to a consistent standard is more informative than a figure supplied by the manufacturer alone.

Reading an HPLC chromatogram on a COA

When you review the HPLC section of a Certificate of Analysis, look beyond the stated percentage to the trace itself:

  • The retention time of the main peak (the time it elutes) should be clearly labelled and consistent with the compound.
  • The main peak should be tall, narrow and symmetrical. A broad or heavily tailing peak can indicate a problem with the sample or the method.
  • Secondary peaks should be few and small. Note whether the report integrates and lists them, or simply states a single number — a transparent lab shows its working.
  • The batch number on the chromatogram should match the vial you hold. A purity figure that cannot be tied to a specific batch tells you nothing about the material in front of you.

For a fuller walkthrough of every section of a certificate, see our guide on how to read a peptide Certificate of Analysis, and on verifying that a COA is genuine rather than simply present.

Why we test to ≥98%, independently

Purity matters in a research setting because impurities are variables. A preparation carrying several percent of truncated sequences or process residues introduces uncontrolled factors into an experiment, undermining reproducibility. Holding every batch to a ≥98% minimum, and verifying it through an independent third-party laboratory rather than relying on a supplier’s own paperwork, is how we keep that variable in check.

Every compound in the Claripep range is accompanied by a batch-specific COA that includes its HPLC chromatogram, mass-spectrometry identity confirmation, and heavy-metal and endotoxin screening where relevant.

This article is provided for research and educational purposes only. It does not constitute medical advice and should not be interpreted as promoting human or veterinary use of any compound. All products supplied by Claripep Ltd are intended strictly for laboratory research applications.

0
0
Your Cart
Empty CartYour cart is emptyReturn to Shop
Secure Checkout
Fast Shipping
Easy Returns